> FRONT WING | FW 1075: Our Front Wing
generates a lot of gradual lift and they are very easy to control. Built
with our Mold Technology with Carbon Twill, PVC core and G33 Bio Resin,
it is one of the most advanced wings on the market. It reaches an
excellent top speed allowing continuous turns with not much effort,
keeping gliding. It’s V shapes allows easier turns keeping speed and
gliding with low effort. Built in Carbon/PCS/Epoxy technology, and
designed with one of the thinnest profiles. For surfers up to 180lb. —
Weight: 1.10kg | Wingspan 65.3cm
> MAST C70: The profile allows control, speed and
no drag at all. Not much lift is generated by the mast itself,
everything is concentrated on the wings. Our technology allowed the mast
to reach maximum stiness and no torsion for speed, control, carving.
The attachment to the board is a full Carbon/Epoxy molded plate with
plate recess of 2mm to allow the mast to fit in perfectly. RTM
Technology built with Carbon/Epoxy G33 Bio Resin. Length of 70cm. —
Weight || 1.6Kg
> FUSELAGE: Aluminium built, FW and Mast
attachment are conic to allow a perfect and precise fitting. It comes in
a length of 63cm. —Weight || 500gr
> BACK WING | BW 225: Built in Full Carbon — Weight || 180gr
> SHIMS: Hydros is delivered with three shims,
Zero, One.Five & Two.Five. Shims are needed to adjust and control
the Angle Of Attack (AOA) of the back wing. Shims help dictate the
amount of lift we will achieve from the back wing. The bigger the AOA
the most Lift we will have, the smaller the AOA the most speed you will
achieve. These should be chosen in relation to the size of the front
wing that is being used.